Hidrostal / Betsy 150S GG
dry self-priming, solids handling diesel engine pump unit
S02007 / 0
Operating conditions
| Liquid | water |
| Capacity max | 720 m³ at 1500 rpm |
| Head max | 42 m at 1500 rpm |
Technical data
| Discharge connection | flange PN10, DN 200 |
| Suction connection | flange PN10, DN 200 |
| Weight | 3140 kg |
| Solids handling | Ø 115 mm |
Drive
| Engine | diesel engine |
| Make / model | Deutz / BF4M2012 |
| Motorpower / rpm | 48 kW x 1500 rpm |
| Power consumption / rpm standard | 45 kW x 1500 rpm |
| Fuel tank | 575 liter |
Features
- large free passage
- capable of pumping viscous liquids containing solids
- large pump capacity combined with low engine power
- the pump set primes very quickly even at very high suction lifts of as much as 8.5 metres
- clog-resistant and wear-resistant centrifugal screw impeller
- the wear liner can be adjusted from outside the pump volute (1R and 3R)
- can handle large quantities of air, up to 100 m³/hour.
- automatic level switching (engine start and stop level control)
- very economical. Fuel consumption is at least 50% lower than conventional wastewater pumps
- double shaft seal submerged in an oil bath guarantees extended shaft seal life (SiC/SiC - SiC/tungsten)
- patented Eekels electronic vacuum system
- very low noise level
Main applications
- emergency pump unit for fire service, water board and water purification
- pumping out sewage pits and cellars
- pumping bentonite and sludge
- pumping out excavation pits and trenches
- pumping out surface water
Notes
- fuel tank is built into an anti-pollution container with built-in oil separator
- noise emissions reduced to (70dB(A)) at 7 metres distance
- casing doors can be locked
- entire casing is made of Sendzimir galvanized steel sheeting
- hand pump for emptying the drip tray and motor oil is fitted inside the canopy
Rental products
Does your project need a temporary pump solution? Then perhaps our rental service can offer an answer because this product is also part of our extensive rental range.