Hidrostal / Betsy 200SL GG

dry self-priming, solids handling diesel engine pump unit

S02008 / 0

Head (m)

Capacity (m³/hr)

  • Forward

    These fields are required

  • PDF

Operating conditions

Liquid water
Capacity max 612 m³ at 1500 rpm
Capacity max 720 m³ at 1800 rpm
Head max 20 m at 1500 rpm
Head max 30 m at 1800 rpm

Technical data

Discharge connection flange PN10, DN 200
Suction connection flange PN10, DN 200
Weight 2930 kg
Solids handling Ø 100 mm

Drive

Engine diesel engine
Make / model Deutz / F4M2011
Motorpower / rpm 26 kW x 1500 rpm
Motorpower / rpm maximum 32 kW x 1800 rpm
Power consumption / rpm standard 15 kW x 1500 rpm
Power consumption / rpm maximum 28 kW x 1800 rpm
Fuel tank 575 liter

Features

  • capable of pumping viscous liquids containing solids
  • large pump capacity combined with low engine power
  • the pump set primes very quickly even at very high suction lifts of as much as 8.5 metres
  • clog-resistant and wear-resistant centrifugal screw impeller
  • can handle large quantities of air, up to 100 m³/hour.
  • automatic level switching (engine start and stop level control)
  • large free passage
  • very economical. Fuel consumption is at least 50% lower than conventional wastewater pumps
  • double shaft seal submerged in an oil bath guarantees extended shaft seal life (SiC/SiC - SiC/tungsten)
  • patented Eekels electronic vacuum system
  • very low noise level

Main applications

  • emergency pump unit for fire service, water board and water purification
  • pumping out sewage pits and cellars
  • pumping bentonite and sludge
  • pumping out excavation pits and trenches
  • pumping out surface water

 

Notes

  • fuel tank is built into an anti-pollution container with built-in oil separator
  • casing doors can be locked
  • hand pump for emptying the drip tray and motor oil is fitted inside the canopy
  • entire casing is made of Sendzimir galvanized steel sheeting
  • noise emissions reduced to 66dB(A) at 7 metres distance